Stakes Made of Metal or Tough Plastic

We offer many different styles of sign posts and stakes. Please note:

PRICES CHANGE due to Steel fluctuations.  CALL EVERY DAY

Portable Sign Frames (Click Here for to View) Real Estate Portable Frames

Real Estate Steel Stakes

MC T-BAR STAKE

MC T-BAR STAKE

Two options for the same great T bar stake: 42″ tall with either a 10″ cross bar or an 18″ cross bar. Made with 3/4″ angle iron construction. Three holes on vertical and two holes on 3/4″ flat top bar for sign mounting. The “T” bar stakes is one of the most popular stakes in the market today. We use 3/4″ angle for the shaft and foot push. The strap at the top is 1/8″ x 3/4″ flat strip, 18″ long. The foot-push is welded, and the T strap is welded on to the shaft (no flimsy rivets). The shaft has a series of slots that run the length of the shaft to accommodate many panel sizes. Black powder coat finish.

Order in multiples of 5 pieces.

WISHBONE STAKE

Custom Order.

Wishbone Sign Stake
The “Wishbone” stake is unique in that the stake will accommodate almost any panel size. The shaft is made from two 3/8″ rod bars running parallel to each other. Simply bolt your panel to the top strap and then run your nut/bolt between the bars/sign panel and tighten – no holes to try and match up with!

These stakes are made from 3/8″ round rod with a 3/4″ wide steel strap welded to the top. The top strap is 17.5″ long.

42″ tall. Shipped in quantities of 12 for Wishbone Stakes.
Also have 48″ tall.

ANGLE STAKE

Angle Sign Stake
The workhorse of the sign industry, these angle stakes a staple for any sign store. These stakes are made from strong 3/4″ angle with a double welded foot-push. There is a series of slots punched into the shaft for panel attachment.

SECURITY STAKE

Security Stakes

These substantial aluminum security stakes are constructed from 1/2″ U-Channel and are angle cut to a point to allow hammering into lawns.

Each stake comes with a soft rubber black cap to easily cover the top end, after installation.

  • Height: Choose from 24″, 30″, or 36″ Tall
  • Finish: Choose from Mill, Black, or White
  • Soft rubber cap included (easily fits stake)
  • Angle cut for easy install in soft or sandy soils, use a soft mallet for hammering into harder ground (lawns)
  • Your sign attaches easily, using self-tapping sheet metal screws or double sided tape (not included)
  • Always remember for your safety and to avoid damage, check for underground utilities, sprinkler systems etc.

Minimum order is 50 stakes.

Please note: 36″ stakes are custom made.

These are ideal for security firms or anywhere you need a small sign to put around the house or building.

PRICES CHANGE due to Steel Fluctuations. CALL EVERY DAY to confirm.

This has been a challenging year and changes in the material markets have resulted in unprecedented rapidly rising costs. The cost of plastics, natural gas, oil, and steel have all increased from 50% to 150% over the few months.

Plastic resin pricing continues to rise due to material shortages resulting from the:

  • Surging demand after lock downs
  • Refinery shutdowns because of Covid
  • Texas weather shutting down refinery and chemical operations
  • Surging resin demand from international markets diverting North American material
  • Overwhelmed logistics and supply chain

We understand that this is unwelcome news, and we look forward to removing the surcharge when raw material costs decrease and stabilize.

Please Note: PRICES CHANGE EVERY DAY due to world affairs.  We cannot keep the prices current.  CALL FOR CURRENT PRICING.

Real Estate Steel Stakes * Made in America
Quantity – Cost per Each
     
T-Bar Stake 42 Inches with 10″ Cross Bar* (minimum order is 10, absolute minimum is 5 @ $22.00 each) MC 221 $12.25
T-Bar Stake 42 Inches with 18″ Cross Bar* (minimum order is 10, absolute minimum is 5 @ $22.93 each) MC 221 $12.93
Wishbone Stake 42 Inches* – Custom Order; please call     CALL
Wishbone Stake 48 Inches* – Custom Order; please call     CALL
Angle Stake 3.8 Foot* (minimum order is 10, absolute minimum is 5 @ $17.50 each) BU 221 $14.50
Security Stake 24 Inch* (MINIMUM order: 50 stakes) MC 221 $2.70
Security Stake 30 Inch* (MINIMUM order: 50 stakes) MC 221 $3.30
Security Stake 36 Inch* (MINIMUM order: 50 stakes) CUSTOM ORDER MC 221 $3.75
Heavy Duty Realtor Steel Stake* (MINIMUM order: 10 stakes) MC 221 $11.15
Plastic Tough-Stakes (MINIMUM order: 10 stakes) PC 31721 $16.34
*Steel is American and products made in America.  Security stakes are made of aluminum.

 

Note: Due to higher energy costs, there is a $10 drop off charge per shipment from the freight company in addition to the normal freight charges.

Cost per each. Order in multiples shown. Call for bulk.
Wishbone Stakes – Custom Order; please call.
Plastic Tough-Stakes shipped in multiples of 10.
Call for larger quantity discounts, we will cut you a deal.
Call us on a slow day, we will give discounts to get you motivated to get your check book out.

Heavy Duty Steel Sign Stakes

 

Plastic Real Estate Sign Post

Heavy Duty Realtor Steel Sign Post and Stake
Heavy Duty Realtor Steel Stake $11.15 each
33 inches tall, made from heavy duty 3/4 angle iron.
Minimum order: 10 stakes

 

MC

  Tough Plastic Real Estate Sign Post
Plastic Tough-Stakes, shown with mounting holes

 

PL

Plastic Wing Nuts

Plastic Wing Nut
Plastic Wing Nut: 49 cents each

Heritage Signs, Frames and More, LLC
(formerly Heritage Advertising, Inc.)
Telephone: (321) 253-0424
Email: HeritageSignsLady@yahoo.com